Pair of Brown Flower Patches Iron Sew On Clothes Crafts Bag Flowers Patch Badge

Pair of Brown Flower Patches Iron Sew On Clothes Crafts Bag Flowers Patch Badge

Give clothing, bags and craft projects a distinctive floral finish with this pair of brown embroidered flower patches. Designed in deep chocolate and warm brown shades with contrasting golden-yellow stitched details, each patch features an elaborate arrangement of a large open flower, a smaller flower bud, layered leaves and decorative stems.

The rich, dark colouring gives this pair a particularly striking appearance. Fine golden stitching highlights the shapes of the petals and leaves, while lighter brown embroidery towards the base provides extra contrast and depth. The result is a detailed floral design that can work equally well as a subtle addition to neutral clothing or as a bold decorative feature on lighter fabrics.

The two patches form a coordinating mirrored pair, with one facing left and the other facing right. This makes them ideal for symmetrical designs, although each patch can also be used independently.

Each patch measures approximately 6.9 cm Width x 11.8 cm Height.

Decorate, Personalise and Upcycle

These embroidered flower patches are an easy way to give clothes and accessories a more individual appearance. They can transform a simple garment without the need for complicated embroidery or alterations.

Use them to decorate:

• Jeans and denim trousers
• Denim jackets and waistcoats
• Shirts and blouses
• T-shirts and tops
• Dresses and skirts
• Trousers and shorts
• Coats and jackets
• Handbags and tote bags
• Backpacks and fabric bags
• Fabric accessories
• Handmade craft projects
• Upcycled clothing and accessories

The patches can also be used as a decorative repair. A small mark, stain, worn area or minor hole can sometimes be covered with an embroidered patch, allowing you to extend the life of a favourite garment while adding an attractive new feature.

Creative Ideas for Using the Pair

The mirrored design gives you plenty of freedom when deciding where to position your patches.

Decorate a denim jacket:
Position one flower on each side of the front of a jacket for a balanced floral design. They can be placed above the pockets, alongside the lapels or towards the lower corners.

Create a statement jacket back:
Arrange both patches together on the back of a jacket. Positioning them opposite one another creates the appearance of a larger floral arrangement and makes a plain denim or fabric jacket much more distinctive.

Customise jeans or trousers:
Place the patches beside the front or back pockets, down the outer legs or towards the ankles. The long floral shape works especially well when positioned vertically along a trouser leg.

Transform a plain bag:
Add the pair to a tote bag, handbag or backpack. Use them symmetrically on either side or position both together to create a larger centrepiece.

Decorate a dress or skirt:
The patches can be positioned near the hem, around pockets, at the waist or on opposite sides of a dress. Their brown and gold tones work particularly well with neutral and earthy coloured fabrics.

Create coordinating accessories:
There is no need to use both patches on the same item. Try adding one to a jacket and the other to a matching bag, or use one on jeans and the second on another accessory.

Use in craft and upcycling projects:
The patches can form part of larger textile designs alongside other embroidered motifs, trims, ribbons or decorative sewing. They are ideal for giving handmade and upcycled projects an individual finish.

How to Iron On the Patches

The patches feature an iron-on backing for convenient application to many suitable fabrics.

Before starting, always check the care label of the item you are decorating. The fabric must be capable of safely tolerating the heat required to activate the adhesive. If the material is delicate, coated, waterproof, highly stretchy or heat-sensitive, sewing the patch on is usually the better choice.

Step 1 – Prepare the garment

Make sure the fabric is clean and completely dry. Place it on a firm, flat, heat-resistant surface.

Briefly iron the area where the patch will be positioned. This helps remove wrinkles and moisture and creates a smooth surface for application.

Step 2 – Decide on the position

Place the patch onto the garment with the embroidered side facing upwards and the adhesive backing against the fabric.

If you are applying both patches, arrange them carefully before using any heat. Because they form a mirrored pair, you may wish to measure their distance from pockets, seams, edges or the centre of the garment to achieve an even appearance.

Step 3 – Cover the embroidery

Place a thin cotton cloth or pressing cloth over the entire patch. This creates a protective layer between the hot iron and the embroidered threads.

Do not place the hot iron directly onto the decorative embroidery.

Step 4 – Apply the heat

Set your iron to a suitable medium-to-high temperature for the fabric and do not use steam.

Press firmly down over the covered patch for approximately 20–30 seconds. Use steady downward pressure rather than moving the iron continuously backwards and forwards.

As the patch has several flowers, leaves and narrow sections, make sure you apply heat across the entire design. Pay particular attention to the pointed leaves and outer edges.

Step 5 – Iron from the reverse

Where possible, turn the garment inside out and apply heat to the reverse side of the patch area for approximately another 20–30 seconds.

Heating from the reverse helps the heat travel through the fabric to the adhesive backing and can help create a stronger bond.

Step 6 – Leave the patch to cool

Allow the patch to cool completely before handling or testing it. The adhesive continues to set while cooling, so avoid pulling or bending the fabric immediately after ironing.

Once cool, gently check around the edges. If any part has not completely bonded, cover it again with the cotton cloth and repeat the heating process for that section.

Allow the adhesive plenty of time to settle before washing the garment.

How to Sew On the Patches

These patches can also be sewn directly onto fabric. Sewing is an excellent choice when the item cannot safely be ironed or when you want an especially secure attachment.

First, decide where you would like the patch and temporarily secure it with sewing pins or a few loose holding stitches.

Choose a strong sewing thread. Dark brown thread will blend particularly well with the outer edges of these patches and make the attachment stitches less noticeable.

Thread a suitable hand-sewing needle and tie a knot in the end of the thread.

Starting from the reverse of the fabric, bring the needle through close to the embroidered border. Beginning from the back keeps the initial knot hidden.

Make small, neat stitches around the outer edge of the patch. Follow the shape of the flowers, leaves and stems carefully.

The pointed leaves and narrow sections are worth securing particularly well. Small stitches around these areas help prevent the tips from lifting or catching during use.

Continue around the entire patch until all edges are securely attached.

Finish by passing the needle back through to the reverse side of the fabric and tie the thread securely.

Repeat the process with the second patch if required.

For Extra Security – Iron and Sew

For clothing and accessories that receive frequent wear, you can combine both attachment methods.

First iron the patch into position, allow it to cool completely and then add small stitches around the outer edges.

The iron-on backing holds the patch neatly in position while you sew, and the additional stitching provides extra security.

This is particularly useful for items such as jeans, jackets, backpacks, tote bags and other frequently used accessories.

Iron On or Sew On – Which Is Best?

Ironing is convenient for many cotton and denim fabrics and provides a quick way to attach the patches without visible sewing.

Sewing may be preferable for delicate fabrics, heat-sensitive synthetic materials, stretchy garments, coated fabrics or items that cannot be safely pressed with a hot iron.

Sewing is also a good option if the item will be washed frequently or subjected to considerable movement and wear.

For maximum security on suitable fabrics, ironing followed by sewing around the edges provides the benefits of both methods.

Caring for Your Patched Clothing

Once attached, treating the garment carefully will help keep the embroidery looking attractive.

Where possible, turn the garment inside out before washing. Use a moderate washing temperature and avoid unnecessarily harsh wash cycles.

Allow the item to dry naturally where practical.

Check the edges occasionally after repeated washing or heavy use. If an ironed section begins to lift, it can be reheated using a protective cloth or secured permanently with a few stitches.

Product Details

Quantity: 2 embroidered flower patches
Design: Flowers, flower buds, leaves and stems
Colour: Dark brown and warm brown with golden-yellow embroidered detailing
Style: Coordinating mirrored left and right pair
Size: Each patch measures approximately 6.9 cm Width x 11.8 cm Height
Application: Iron on or sew on
Suitable for: Clothes, jeans, jackets, dresses, skirts, trousers, bags, backpacks, crafts, upcycling and suitable fabric projects

Whether you are creating a customised denim jacket, decorating a favourite bag, adding detail to jeans, working on a craft project or giving an older garment a completely new appearance, this pair of brown embroidered flower patches offers a versatile and creative way to add rich floral decoration to your project.